Advertisement
Precautions for Safety
• Read these "Precautions for Safety" carefully before installation.
• The precautions described below include important items regarding safety. Observe them without fail.
• After the installation work, perform a trial operation to check for any problem.
• Ask an authorized dealer or qualified installation professional to install or reinstall the
software.
• Perform installation work properly according to this Installation Manual.
• Do not modify the unit.
• Perform wiring correctly in accordance with specified the current capacity.
Failure to do so may result in short-circuiting, overheating, or fire.
• Connect the specified cables for the terminals securely to prevent external forces from
affecting them.
Failure to do so may result in disconnection, overheating, or fire.
Before Installation
NOTE
This CF (Compact Flash) card is the software for the Intelligent Server (Model: BMS-LSV4E) only.
Prepare the Intelligent Server to use this card. This card is not applicable to BMS-LSV2E.
Check the following package contents.
No.
Item
1
Intelligent Server Software
2
Cable
3
Closed end wire joint
4
Installation Manual
Use the following wiring materials to connect signal lines. (Procured on site)
No.
Signal line
1
For RS-485
CAUTION
Quantity
1
Compact Flash card
1
RS-485 cable for Intelligent Server
2
1
Description
Type
2-core shield wire
Wire size
2
1.25 mm
, 500m max. (total length)
Length
1
Remarks
Advertisement
