Wiper Sensor - Brother GT-3 Series Service Manual

6. Replacing Parts

6-1-26. Wiper Sensor

Required Tool
・Phillips screwdriver
Disassembling
1.
Remove the Maintenance Unit. (Refer to "6-1-16. Assembling / Disassembling of the Maintenance Unit".)
2.
Remove the Connector (1).
(4)
3.
Remove the Screw (3) that fixes the W Sensor Holder (2).
Replacement & Assembling
1.
Replace the Sensor (4).
2.
Confirm that the claws (5) of the Sensor are hooked firmly.
(4)
198
(2)
(1)
(2)
(3)
(5)
(4)
GT-3 Series
(5)