Brother GT-3 Series Service Manual page 139

6. Replacing Parts
Assembling
1.
Prepare the new Platen Belt.
2.
Pass the Platen Belt through the Belt Setting Plate (1) and the Belt Holder (2). Hold the three tips of the
both edges of the Platen Belt (4).
(2)
3.
Fix the Belt Setting Plate (1) to the Platen Arm (6) with the two Bolt Sockets (5).
<Note> Fix the Belt Setting Plate by pushing the machined surface of the Platen Arm.
4.
Adjust the tension of the Belt.
(Refer to "6-1-5. Adjusting the tension of Platen Belt and Reduction Belt".)
130
(4)
(1)
(3)
(6)
(5)
(6)
(1)
GT-3 Series