Brother GT-3 Series Service Manual page 266

5.
Remove the Joint VRSP6 (7) to cover the Tube and connect the Tube to the Joint VRFT6 (4).
<Note> Rotate the Joint by 30-40 degrees where you insert. Do not twist or push in, otherwise the Joint
may be damaged.
6.
Fix the Tube with the Wire Saddle (5).
7.
Follow the Tube layout as shown in the bottom photos.
K
M
C
Y
(4)
Do not give stress to the Tube in operation.
(5)
Y
GT-3 Series
6. Replacing Parts
C
M
K
(Continues to the next page)
257