Brother GT-3 Series Service Manual page 190

11. Slide the Pump Rotor Holder (6) from the left side to the right side of the Pump Housing (10) and push
down until it clicks.
12. Fix the Pump Rotor Holder (6) with the two Screws (7) with tightening torque 0.3 N·m. Do not push the
Pump Rotor Holder to the right side.
(8)
13. Insert the Pump Tube (3) to the T Plug (5). Bind it with the Band (4) not to slip the Pump Tube from the T
Plug (5).
(10)
(6)
(6)
(7)
(3)
(4)
(5)
GT-3 Series
6. Replacing Parts
181