Brother GT-3 Series Service Manual page 366

Error
Message
code
USB flash drive Access
2102
Error
No Files
2105
3000 PC Communication Error
3001 PC Communication Error
3002
3003
3004
PC Data Error
3005
3010
3013
3014
PC Data Error (with
3100
White)
PC Data Error (381
3101
mode)
Meaning
The mounted USB flash drive is
out of support, or USB flash drive
is broken.
No available data in the USB flash
drive.
GT-3 failed to receive the print
data from the PC.
The PC will not receive the data
sent from GT-3.
GT-3 received the data that is not
supported.
No compatibility of version
between the PC driver and the
GT-3 firmware.
The Check Sums for the received
program data did not correspond
when updating the firmware.
The Check Sums for the received
data did not correspond when
updating the EEPROM.
Irregular maintenance command
was mixed in the normal Job.
PC asks to terminate the job by
Job End command
Length error of PC command
GT-341 received the print data
with White print data included.
GT-361 received the print data
with 4 White Print Head data
included.
GT-3 Series
Solution
Re-mount the USB flash drive. Check with PC if
the USB flash drive is available.
Confirm if the USB flash drive is formatted with
FAT16 (FAT) or FAT 32.
Re-mount the USB flash drive. Check with PC if
the USB flash drive is available.
Confirm if the USB flash drive is formatted with
FAT16 (FAT) or FAT 32.
Confirm the USB flash drive by executing
CHKDSK on PC if the file system is available.
Try another USB flash drive.
Confirm the proper file is saved in the USB flash
drive. Confirm the file format or extension (ar3).
Copy the print data to the USB flash drive.
Remake the print data on PC.
This error occurs when the USB cable is
disconnected during data transmission, or data
transmission is canceled on the PC.
Check the connection between the PC and GT-3.
Confirm if the GT-3 is offline. Reboot both the PC
and GT-3.
This error occurs when the USB cable is
disconnected during data transmission, or GT-3
tools are canceled in sending data to the PC.
Check the connection between the PC and GT-3,
and retry the PC operation with the GT-3 tools. If it
has no effect, reboot both the PC and GT-3.
Check the connection between the PC and GT-3,
and send print data again. Or reboot both the PC
and GT-3.
Confirm the versions of both firmware and Printer
Driver.
Execute the firmware update from PC (GT-3
Firmware Update) from the beginning. Avoid the
noisy condition.
Try with another USB cable.
Execute the PC operation from the beginning.
Avoid the noisy condition.
Try with another USB cable.
Reboot GT-3 and send the print data again. These
errors may occur when GT-3 malfunctions in
improper environment. You can print if no error is
indicated.
Confirm the versions of both firmware and Printer
Driver.
Try with another USB cable.
Confirm that the Machine Mode is GT-341 by
Printer Driver. GT-341 cannot receive the print data
with White print data included.
Confirm that the Machine Mode is GT-361 by
Printer Driver. GT-361 cannot receive the print data
with four White Print Head data included.
8. Error Code List
357