Brother GT-3 Series Service Manual page 157

6. Replacing Parts
5.
Remove the one a (S/P Washer) M4X8 in the center (5) and the four Screws (6) at the corners, and then
remove the Platen Top Plate (7).
6
(6)
6.
Mount the new Platen Top Plate (7) on the Platen Shaft (8).
<Note> Insert the Platen Shaft to the hole on the Platen Top Plate.
7.
Fix the Platen Top Plate (7) with the one Screw (5) in the center and the four Screws (6) at the corners.
(6)
148
5
(5)
7
(7)
(5)
(7)
GT-3 Series