Brother GT-3 Series Service Manual page 186

12. Insert the projection of the right side of the Wiper Blade Assy (6) by sliding the inside of the Wiper Drive
Plate.
(6)
<Note> Do not stretch the Wiper Drive Plate by force, it may be damaged.
13. Make sure that the projections of both sides are inserted properly to the oval holes on the Wiper Drive
Plate.
14. Mount the Wiper Cleaner.
15. Close the Front Cover and turn ON the printer.
<Note>
If an abnormal sound is emitted or some errors appear when you turn ON the printer, there is a possibility
that the Wiper Blade and the Wiper Cleaner may be touching. Confirm the positions and the situation that
the Wiper Cleaner is properly mounted.
Rubber Blade side
Rubber Blade side
Wiper Drive Plate in the right side
GT-3 Series
6. Replacing Parts
0066Y
177