Brother GT-3 Series Service Manual page 362

C. Restart after 2 weeks' storage
1.
Insert the well-agitated White Ink Cartridges by replacing from either Capping Cartridges or 'almost
empty but not expired' White Ink Cartridges. If the Tubes are filled with Maintenance Solution with no air
inside, then install the White Ink by referring to the steps in "4-1-4. Cleaning the Tubes and Print Heads
(white/Color Tube Cleaning)" If you find some air inside the Tube, then select [ Maintenance ] > [ Load
White] of the menu and install the Maintenance Solution first with the Maintenance Cartridge and then
install the White Ink. Follow the indication on the Display.
2.
After loading the White Ink, print Nozzle Check Pattern for both Color and White in [ Test Print ] menu to
find out the print quality. If the print quality is not good enough, especially Color side, clean the surface of
the Print Heads by referring "5-1-2. Cleaning the Print Head Nozzles" of the Instruction Manual.
<Note>
The Auto Cleaning of Color side will be Powerful Cleaning after you leave the printer unused for more than
two weeks.
7. Transporting the GT-3 Series / Required Maintenance for Long-term Storage
GT-3 Series
353