Brother GT-3 Series Service Manual page 364

Error
Message
code
1060 Temp Low:
1061 Temp High:
1070 Battery Life
1080 RTC not Adjusted
1100 Pump Tube Life
1111 Clean Tube W1
1112 Clean Tube W2
1113 Clean Tube W3
1114 Clean Tube W4
Exchange
1200
Maintenance Parts
Exchange
1201
Maintenance Parts
1210 Exhaust Fan Stop
1220 Exchange Filter K
1221 Exchange Filter M
1222 Exchange Filter C
1223 Exchange Filter Y
Meaning
The ambient temperature is
below the range that maintains
the print quality. "xxx" is the
current temperature.
The ambient temperature is
above the range that maintains
the print quality. "xxx" is the
current temperature.
The battery ran out.
The internal clock has not been
set.
Exchange Pump Tube.
W1 needs to do Tube
Cleaning.
W2 needs to do Tube
Cleaning.
W3 needs to do Tube
Cleaning.
W4 needs to do Tube
Cleaning.
Needs to exchange the
Maintenance Parts and to
clean the printer.
Needs to exchange the
Maintenance Parts and to
clean the printer.
The Fan to exhaust ink mist is
stopped.
K/C Filter needs to be
replaced.
M/Y Filter needs to be
replaced.
K/C Filter needs to be
replaced.
M/Y Filter needs to be
replaced.
Raise the room temperature.
Replace the Carriage PCB and adjust the temperature with
GT-3 Service Tool.
Raise the room temperature.
Replace the Carriage PCB and adjust the temperature with
GT-3 Service Tool.
Replace the Main PCB battery.
Set the time with GT-3 Service Tool.
Replace the Pump Tube.
Execute Tube Cleaning W1.
Execute Tube Cleaning W2.
Execute Tube Cleaning W3.
Execute Tube Cleaning W4.
Exchange the Maintenance Parts and clean the inside of
the printer. See "6-1. Replacing Consumables" of the
Instruction Manual.
Exchange the Maintenance Parts and clean the inside of
the printer. See "6-1. Replacing Consumables" of the
Instruction Manual.
Confirm the Harness in the Exhaust Fan.
Replace the Exhaust Fan.
Replace with the new K/C Filter on the K Print Head.
Replace with the new M/Y Filter on the M Print Head.
Replace with the new K/C Filter on the C Print Head.
Replace with the new M/Y Filter on the Y Print Head.
GT-3 Series
8. Error Code List
Solution
355