Assembling
1.
Hold the Bellows (3) with Bellows Guide Plate R (1) and Bellows Guide Plate L (2).
2.
Assemble Bellows Guide Plate R (1) and Bellows Guide Plate L (2) by the following steps.
Keep those three parts as shown in the step 1 and put the Bellows Guide Plate R (1) through the Bellows
Support Plate (4) and set it to the position, from the back side first then the front side.
(2)
(1)
Setting Position
The back side
(1)
(3)
(2)
Put them through (4)
GT-3 Series
6. Replacing Parts
(4)
(2)
(3)
(1)
Setting Position
The front side
(1)
125