Brother GT-3 Series Service Manual page 32

Repeat the steps 6 to 12 and mount all the Print Heads.
Color side
White side
<Note>
The photos above are all for GT-381. Mount only on CMYK for GT-341; mount on CMYK plus W1, W2 for
GT-361.
Color FFCs should go through the right side of the Tubes.
Tube
FFC area (right side of the Tube)
Run the FFCs through the back of the metal plate.
White FFCs NEVER stay this area:
White FFCs must go through the inside of the Tubes.
If outside of the Tubes, then the Tubes may touch the
other parts while Carriage moving and should get
seriously damaged.
Color Tubes
M
K
W1 W2
W1 W2
White Connectors
Carriage PCB
GT-3 Series
2. Setting up GT-3 Series
FFCs area
C
Y
W3 W4
W3 W4
23