Brother GT-3 Series Service Manual page 248

21. Remove the Tube from the Tube Holder Fix (15).
22. Loosen the Tube Clamp D3 (21) and remove the Tube.
<Note> Pay attention to the ink flowing out from the Tube in disconnecting; it may give damage to your
hands, the printer and the table.
23. Cover the needle with the protection (cut tube) to protect from the dust and threads.
Tube Joint 2:*VRFP6
24. Remove the old Tube from the printer.
<Note> Pay attention not to pull out the other Tubes; do not give damage to the other Tubes in operation.
(15)
(21)
Protection (cut tube)
GT-3 Series
6. Replacing Parts
239