5.
Connect the Y-shaped Tube Joints (4) and the Joint Tubes (5). Insert the Joint Tubes within 1 mm from
the edge.
6.
Connect the Y-shaped Tube Joints (4) and the Capping Tubes (6). Make sure that those tubes should
cross as shown below.
(6)
(6)
7.
Connect the T-shaped Tube Joint (7) and the Connecting Tube (8), and the Capping Tube (9).
(5)
(4)
(4)
(4)
(7)
(8)
(9)
GT-3 Series
6. Replacing Parts
1mm or less
0025N
(4)
209