Paper Eject Sensor Pcb Assy - Brother HL-2230 Service Manual

9.25 Paper Eject Sensor PCB ASSY

(1) Remove the Taptite cup S M3x6 SR screw and the two Taptite bind B M4x12 screws.
(2) Release the Hooks to remove the Main PCB shield.
Hook
Assembling Note:
• When assembling the Main PCB shield, insert the Flat cable of the Paper eject sensor
PCB ASSY into the hole of the Main PCB shield.
• When assembling the Main PCB shield, tighten the two Taptite bind B M4x12 screws in
numerical order written in the plate.
Taptite bind B M4x12
2
Taptite cup S M3X6 SR
1
Main PCB shield
Fig. 3-58
3-59
Hook
Confidential