Installation Of The Optional Dispenser - SATO CL4NX Service Manual

6.4 Installation of the Optional Dispenser

CL4NX
CAUTION
Before the installation, be sure to power off the printer and disconnect the power cord.
Required tools:
• Phillips screwdriver (JIS #2 or equivalent)
• Nipper
• Pliers
1
Open the top cover
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
2
Remove two screws
/
front covers and
Slide in the arrow direction to remove the front
covers.
. 3
and print head .
$
and the
1
.
6 Installation of Options
5
3
CL4NX/CL6NX Service Manual
1
2
4
111