SATO CL4NX Service Manual page 97

CL6NX
Required tool:
• Phillips screwdriver (JIS #2 or equivalent)
1
Make sure that the printer is in power off mode, then disconnect the power cord from
the AC outlet.
2
Remove the left housing cover.
Refer to Section 5.1.1 Remove the Left Housing
3
Remove the rewind core unit.
Refer to Section 5.15 Replacing the Torque Limiter for Liner Rewinder
4
Remove three screws
media holder plate
5
Slide in the arrow direction to remove the
media holder plate
.
attaching the
3
.
3
.
Cover.
(Optional).
Slide
CL4NX/CL6NX Service Manual
5 Replacement
1
95