SATO CL4NX Service Manual page 21

Data
Tools > Service > Reset > Select > Data
Initialize the data saved in the printer.
The data to be initialized are the fonts and graphics registered in the
printer.
When you select Data, the confirmation screen shows.
Press the left soft button to cancel or right soft button to perform the
initialization.
The printer will reboot after reset.
CAUTION
It is generally not necessary to perform the initialization. Doing so could
change the print conditions.
Data & Settings
Tools > Service > Reset > Select > Data & Settings
Initialize the data and setting values of the printer.
Select the setting items to be initialized.
The options are as follows:
• User Reset: Initialize the data and setting values.
• User Reset (-Interface): Initialize the data and setting values that are
not included in the Interface menu.
• Factory Reset: Initialize to the status after factory shipment.
• Factory Reset (-Interface): Initialize the items that are not included in
the Interface menu to the status after factory shipment.
• Interface: Initialize the data and setting values in the Interface menu.
• Printing: Initialize the data and setting values in the Printing menu.
Select the item to be initialized using the
right soft button to perform the initialization.
The confirmation screen shows.
Press the left soft button to cancel or right soft button to perform the
initialization.
The printer will reboot after reset.
Refer to Section 7.1 List of Initial Value of the CL4NX/CL6NX operator
manual and Section 2.4 Initial Values in Tools Menu
the initial value of each setting item.
Note
The data to be initialized are the fonts and graphics registered in the
printer.
/ buttons, then press the
of this manual for
2 Operation and Configuration
CL4NX/CL6NX Service Manual
19