SATO CL4NX Service Manual page 16

2 Operation and Configuration
RFID
Tools > Service > RFID
Set the functions for RFID.
The setting items are as follows:
1 RFID Mode
2 Module
3 Region
4 Inventory Check
5 Inventory Timeout
6 Verify
7 PREND Type 3/4
RFID Mode
Tools > Service > RFID > RFID Mode
Enable or disable the RFID mode.
When RFID Mode is set to Enabled, the RFID menu shows in the
Interface mode menu.
The options are as follows:
• Enabled: Enable the RFID mode.
• Disabled: Disable the RFID mode.
Module
Tools > Service > RFID > Module
Shows the type of RFID module installed on the printer.
14
CL4NX/CL6NX Service Manual
Enable or disable the RFID mode.
Shows the type of RFID module installed on the
printer.
Set the region where you use the printer.
*Shows only if you have installed the UHF
RFID module.
Enable or disable the inventory check function.
*Shows only if you have installed the UHF
RFID module.
Set the timeout period of the inventory check.
*Shows only if you have installed the UHF
RFID module.
Enable or disable the verification of data written
on tag.
Set the external output signal of the PREND.