SATO CL4NX Service Manual page 22

2 Operation and Configuration
Settings
Tools > Service > Reset > Select > Settings
Select the setting items to be initialized.
The options are as follows:
• User Reset: Initialize the setting values.
• User Reset (-Interface): Initialize the setting values that are not
included in the Interface menu.
• Factory Reset: Initialize to the status after factory shipment.
• Factory Reset (-Interface): Initialize the items that are not included in
the Interface menu to the status after factory shipment.
• Interface: Initialize the setting values in the Interface menu.
• Printing: Initialize the setting values in the Printing menu.
Select the item to be initialized using the
right soft button to perform the initialization.
The confirmation screen shows.
Press the left soft button to cancel or right soft button to perform the
initialization.
Refer to Section 7.1 List of Initial Value of the CL4NX/CL6NX operator
manual and Section 2.4 Initial Values in Tools Menu
the initial value of each setting item.
Counters
Tools > Service > Reset > Counters
Select the counter information to be initialized.
The options are as follows:
• Head: Initialize the head counter (media feed distance).
• Cutter: Initialize the cutter counter (number of cuts).
Select the item to be initialized using the
right soft button to perform the initialization.
The confirmation screen shows.
Press the left soft button to cancel or right soft button to perform the
initialization.
Refer to Section 7.1 List of Initial Value of the CL4NX/CL6NX operator
manual and Section 2.4 Initial Values in Tools Menu
the initial value of each setting item.
20
CL4NX/CL6NX Service Manual
/ buttons, then press the
of this manual for
/ buttons, then press the
of this manual for