SATO CL4NX Service Manual page 62

4 Checking and Performing Printer Adjustments
6
Turn over to the inner side of the gearbox
and then check the condition of the timing
belt 1.
Make sure that there is tension on the timing belt.
7
Tighten the screw $ of the tension
bracket.
8
If the tension of the timing belt is not
enough, replace the timing belt.
Refer to Section 5.10 Replacing the Timing Belt
for details.
9
Perform the assembly with the reverse
procedure.
60
CL4NX/CL6NX Service Manual
Inner side of gear box
5