SATO CL4NX Service Manual page 51

6
Press the / buttons to select the types
of test print and then press the
The options are as follows.
• Factory: Perform the factory test print.
• Configuration List: Print the configuration
information of the printer.
• Configure QR: Print the configuration information
with a QR code.
• Paper Sensor: Print the detection result of the
media sensor level.
7
Press the / buttons to select the item
you want to set. Then press the
buttons to change the value.
You can set the following items.
• Label Length (not available for Factory test print)
• Pitch
• Offset
• Darkness Adjust
Refer to Chapter 4 Operation and Configuration
of the CL4NX/CL6NX operator manual for more
details.
8
Press the right soft button to start the test
print.
Press the right soft button again to pause the print.
To stop the test print, first pause the print and then press the
4 Checking and Performing Printer Adjustments
button.
/
button.
CL4NX/CL6NX Service Manual
49