6.6.2
Installation of the Optional HF RFID Kit
CAUTION
Before the installation, be sure to power off the printer and disconnect the power cord.
Wear gloves when you handle the print head, to prevent damage to the print head.
Required tools:
• Phillips screwdriver (JIS #1 and #2,
or equivalent)
1
Open the top cover
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
2
Remove two screws
/
front covers
and
Slide in the arrow direction to remove the
front covers.
.
3
and print head
.
$
and the
1
.
6 Installation of Options
5
3
CL4NX/CL6NX Service Manual
1
2
4
149