D Heavy-Duty Media Cutter Installation; Prepare The Printer - IBM Infoprint 6700 Series User Manual

D

Prepare The Printer

Screw (2)
1. Set the printer power switch to O (Off).
2. Open the peel/tear door by pulling it upward, then forward.
3. Using the appropriate metric hex key, remove the two screws attaching
the peel/tear assembly to the lower support assembly.
NOTE: Keep the two screws you have removed; you will use them to attach
Heavy-Duty Media Cutter
Installation
Peel/Tear
Assembly
Figure 1. Peel/Tear Assembly
the cutter assembly to the lower support assembly.
Lower Support
Assembly
Peel/Tear Door
353