Table of Contents
Advertisement
Prop Line Length
(From page 189.)
•
Enable (the default). The position of the next graphic element will be
determined by the physical length of a text string (when using a
proportional spaced font).
•
Disable. The position of the next graphic element will be determined as if
the font was monospaced (all characters had the same specified width).
Prop. Spacing
(From page 190, page 193, page 195, page 197, page 199.)
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space around the character.
•
Enable (the default). The width of each character cell varies with the
width of the character. For example, [i] takes less space to print than [m].
Using proportional fonts generally increases the readability of printed
documents, giving text a typeset appearance.
•
Disable. Each character cell is printed with the same width. Each column
in the printed text will line up.
PSeries Dbl High
(From page 191.) This menu option allows printing compatibility between the
current and older models of IBM printers.
•
Normal (the default). This is normal Double High printing for current
model printers.
•
P3/4/6/9 Compat. Where older printers printed two dot rows higher, this
option allows for compatibility by raising the print two dot rows to match
the current models dot row value (two dot rows lower).
Repeat Form
(From page 187)
When enabled, this menu speeds up the label printing for repeated form. This
only applies to forms where the entire form is enclosed in the
^IREPV...^IREPE command.
•
Enable (the default). Speeds up the processing of repeated forms for
PGL, thereby resulting in increased printer throughput. This option
provides no speed benefit for forms that are unrelated to one another and
should be disabled under those circumstances.
•
Disable. Should be selected when subsequent forms are unrelated to
one another.
Emulation Submenus
Overview
235
Advertisement
Table of Contents
