Table of Contents
Advertisement
Chapter
2
Loading Media And Ribbon
For direct thermal operation (no ribbon required):
•
•
For thermal transfer operation (which uses a ribbon):
Complete the ribbon loading procedure (see "Loading Ribbon" on
page 57).
56
If you have not run an Auto Calibrate, do so now. See "Running Auto
Calibrate" on page 78.
If you have already run an Auto Calibrate, complete the following
steps:
a. Close the media cover.
b. Press the FEED key once to verify that the media advances.
c. Press the PAUSE key to place the printer online.
Advertisement
Table of Contents
