Table of Contents
Advertisement
Chapter
3
C/T PORT
C/T PORT
C/T PORT
Device Address
Report Status
C/T PORT Submenus
Port Type
This item selects the desired active CTHI interface and appears only when
the CTHI option is installed.
The factory default is Twinax.
Device Address
Allows you to set the device address from 0 through 6. The host directs data
and commands on the twinax line to a specific device based on its unique
device address. After the address has been changed, a Power On Reset
(POR) status is sent to the host.
The factory default is 1.
Timeout
This item allows you to set the time that the printer, when it has not received
data from its host, will begin to service all other host ports looking for data to
print.
The range is 5-60 seconds, and the factory default is 10 seconds.
264
1
Port Type
Twinax*
Address 1*
Timeout
10 sec.*
Disable*
Notes:
* = Factory Default
1
Coax
Disable
Address 0-6
5-60 sec.
Enable
Appears only if the CTHI option is installed.
Advertisement
Table of Contents
