IBM Infoprint 6700 Series User Manual page 244

Chapter 3
Emulation Submenus
Typeface
(From page 190, page 193, page 195, page 197, page 199.)
•
Letter Gothic (the default). Letter Gothic is a non-proportional font where
all of the characters take up the same amount of space when printed.
•
Courier. Courier is a non-proportional (monospaced) font where all
characters take up the same amount of space when printed.
•
OCR-A / OCR-B. Optical character recognition fonts printing at 120 dpi
horizontally and 144 dpi vertically. Both fonts print only at 10 cpi.
Uniform Fonts
(From page 189.)
•
Disable (the default). The typeface selected while in Extended Graphics
Mode will be cancelled when the graphics pass is complete.
•
Enable. The typeface selected while in Extended Graphics Mode will also
be used in Standard Graphics Mode and Normal Mode.
UPC Descenders (PGL)
(From page 185.) This parameter allows you to print bar code descenders
when human readable data is not presented in the UPC/EAN bar codes.
•
Always (the default). UPC/EAN bar codes are printed with descenders,
even if there is no human readable data.
•
Never. UPC/EAN bar codes are printed without descenders if the PDF
command is present.
•
Only With PDF. UPC/EAN bar codes are printed with descenders only
when the PDF command is presented.
UPC Descenders (VGL)
(From page 187.)
•
Enable (the default). UPC/EAN bar codes are printed with descenders,
even if there is no human readable data.
•
Disable. UPC/EAN bar codes are printed without descenders if there is
no human readable data.
244