IBM Infoprint 6700 Series User Manual page 240

Chapter 3
Emulation Submenus
Skip Cmd Prefix
(From page 184.) Stands for Skip Command Prefix. This parameter
determines if the printer will print any data before a PGL command is
received.
•
Enable (the default). The printer ignores all data before a PGL command.
•
Disable. The printer will print all data before a PGL command.
Slash 0
(From page 184, page 187.) This parameter allows you to print the numeral
"0" with or without the slash. This option applies to all character sets except
OCR A and OCR B.
•
Disable (the default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
Slashed Zero
(From page 190, page 193, page 195, page 197, page 199.)
This parameter allows you to print the numeral "0" with or without the slash.
This option applies to all character sets except OCR-A and OCR-B.
•
Disable (the default). Zero is printed without a slash.
•
Enable. Zero is printed with a slash.
Slew Relative
(From page 194.) "Slewing" is rapid vertical paper movement. This parameter
determines the number of lines slewed (either 1-15 lines or 1-16 lines) when
an EVFU Slew Relative command is received.
The options are 1-15 lines (the default) and 1-16 lines.
SPC Char Set
(From page 174.) Allows you to select the print language character set. See
page 174 for the options.
The default is 0500 Internat 5.
SPC Null Supp
(From page 173.) SPC Null Supp stands for SPC Null Suppression.
•
Disable (the default). Ignores nulls. The print position does not move.
•
Enable. Treats nulls as blank spaces.
240