DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting.
The options are Disable (the factory default) and Enable.
ETHERNET PARAMS
ETHERNET
1
PARAMS
NetBIOS Protocol
ASCII Data Port
3
IPDS Data Port
Keep Alive Timer
Ethernet Speed
Job Control
Offline Processing
Enable*
Disable
2
9100*
0-65535
2
5001*
0-65535
3 Minutes*
2-10 Minutes
Auto Select*
10 Half Duplex
Standard*
Enhanced
Disable*
Enable
Notes:
* = Factory Default
1
Appears only if an Ethernet card is installed.
2
Set the port number that works with your host system.
3
Appears only if the IPDS emulation is installed.
ETHERNET PARAMS
ETHERNET ADDRESS Submenus
10 Full Duplex
100 Half Duplex
Off
100 Full Duplex
269