Mechanical Control Board (Pwb-M) - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006
11.3.12

Mechanical Control Board (PWB-M)

NOTE
• If a Finishing Option is installed, remove if from the main unit before trying to
remove the Mechanical Control Board.
• When removing the Finishing Option, support the Horizontal Transport Unit with
your hand to prevent if from dropping.
[1]
[1]
[1]
[3]
[4]
5. Remove all the Connectors and Flat Cables on the Mechanical Control Board.
[1]
[1]
[2]
[1]
4038F2C056DB
[3]
4038F2C057DA
1. Remove the Exit Tray.
See P.74
2. Remove the Rear Left Cover.
See P.73
3. Remove twelve Screws [1] to remove
the protective sheet of DC Power
Supply [2].
4. Remove the Harness [4] from three
Wire saddles [3].
NOTE
• When installing the Mechanical
Control Board, make sure to fix the
Harness at the original position
with the wire saddle.
11. Other
4037F2C058DB
83