Konica Minolta bizhub C250P Service Manual page 89

8. Service Jig
7. Check that the initial startup screen of the External Panel Controller has appeared on
the PC.
NOTE
• If the basic screen does not appear in the External Panel Controller, turn the
printer off. Restart the External Panel Controller, and then turn the printer on
again.
Initial Startup Screen
48
5. Make sure that the Startup dialog
box has appeared.
6. Check that "COM1" is selected for
"Port." Then, click the "OK" key.
4038F2C587DA
Field Service Ver. 2.0 Mar. 2006
4038F2C589DA