Mfp Control Board (Pwb-Mfp) - Konica Minolta bizhub C250P Service Manual

11. Other
[2]
11.3.15

MFP Control Board (PWB-MFP)

[1]
88
4. Disconnect the Connector [2] con-
[3]
4038F2C076DA
1. Remove the Upper Rear Cover,
See P.74, 76
2. Remove the Slide Interface Board.
See P.87
3. Remove thirteen Screws, and
4038F2C507DA
4. Remove the NVRAM [2] on the MFP
[2]
4038F2C077DA
Field Service Ver. 2.0 Mar. 2006
necting to the MFP Control Board
and remove the Slide Interface
Board [3].
Lower Rear Cover and Rear Right
Cover.
remove the Shield cover [1].
Control Board.