Detail On Settings - Konica Minolta bizhub C250P Service Manual

16. TECH. REP. MODE
16.4.8

Detail on settings

A. System Selection
Functions • To select the system type for remote diagnosis.
Use • Use to newly build or change the system.
Setting/ • The default setting is E-Mail.
Procedure
B. ID Code
Functions • To register the Service ID.
Use • Use when registering and changing Service ID.
Setting/ 1. Enter a 7-digit code. (0000001 to 9999999)
Procedure 2. Press the Menu/Select key to register the ID.
3. The "Detail Setting" key will appear when the ID has been registered.
C. Detail Set: E-Mail/Modem
(1) Machine Setting
Functions • Execute the primary setting.
Use • Use to change the set contents.
• Use to register the machine to the CS Remote Care Center.
1. Select the CS Remote Care → ID Code.
Setting/
Procedure 2. Input the ID Code, and press the Menu/Select key.
3. Select the Detail Set: Modem or the Detail Set: E-Mail, and press the Menu/Select
key.
Primary Setting
• Set the Center ID, Device ID, and the phone No.
• When e-mail is selected for system and all setup procedures are completed, E-mail
1
address of the Center is displayed.
* When entering the phone No, 10-Keys and keys on the screen have following mean-
ings.
[-] Pose
[W] Wait
[T] Tone dial : Carry out tone dialing
[P] Pulse dial : Carry out pulse dialing
[*],[#]
Initial Transmission
• Clicking the Initial Transmission key will sent the information to the CS Remote Care
Center to register the machine.
(Only when the Modem or Fax is selected on the system Input.)
(2) Data/Time
Functions • To set the data and time-of-day
Use • Use to set or change the date and time-of-day.
Setting/ 1. Enter the date (month, day and year).
Procedure 2. Enter the time-of-day.
3. Enter the time zone.
4. Press the Menu/Select key to start the clock.
204
"E-Mail"
: Waits to start transmitting after dialing
: Detects the dial tone of the other end
: To be used as necessary
Field Service Ver. 2.0 Mar. 2006
Modem