Konica Minolta bizhub C250P Service Manual page 208

Field Service Ver. 2.0 Mar. 2006
G. TCP Socket
(1) TCP Socket (Binary Mode)
1. TCP Socket Set
Functions • To set whether or not to use the TCP Socket setting of Binary Mode.
Use • To use when using the application, etc. for TCP Socket transmission by Binary Mode.
Setting/ • The default setting is ON.
Procedure
2. Port No.
Functions • To set the port number used for TCP Socket transmission not using the SSL.
Use • To use when entering the port number used for TCP Socket transmission not using
the SSL.
Setting/ • Enter the Port Number between 1 and 65535.
Procedure
3. SSL Setting
Functions • To set whether or not to use SSL for TCP Socket transmission.
Use • To use when SSL is not to be used for TCP Socket transmission.
Setting/ • The default setting is ON.
Procedure
4. Port No. (SSL)
Functions • To set the port number used for TCP Socket communications using the SSL.
Use • To use when entering the port number used for TCP Socket communications using
the SSL.
Setting/ • Enter the Port Number between 1 and 65535.
Procedure
(2) TCP Socket (ASCII Mode)
1. TCP Socket Set
Functions • To set whether or not to set the TCP Socket for ASCII Mode.
Use • To use when using the application, etc. for TCP Socket transmission by ASCII Mode.
Setting/ • The default setting is ON.
Procedure
2. Port No. (ASCII Mode)
Functions • To set the Port Number which is used for TCP Socket transmission by ASCII Mode.
Use • To use when entering the Port Number for TCP Socket transmission by ASCII Mode.
Setting/ • Enter the Port Number between 1 and 65535.
Procedure
"ON"
"ON"
"ON"
14. User Setting
OFF
OFF
OFF
167