Openapi - Konica Minolta bizhub C250P Service Manual

14. User Setting
(6) Encryption Key
1
• It can be set only when the optional Security Kit (SC-503) is mounted.
Functions • To set Encryption key necessary to mount the optional Security Kit SC-503.
Use • To setup Security Kit SC-503.
• To re-set encrypting word due to exchange of NVRAM board or etc.
NOTE
• This setting is available only when the optional Security Kit SC-503 is
mounted.
• HDD formatting is required after this setting. Therefore it is necessary to
retrieve certain data from HDD in advance.
The following data will be lost after HDD formatting.
* Address data
* Authentication data : Authentication mode, User Authentication setting,
* Box setting data
* Job history, Fax transmission history
Setting/ 1. Enter the Encryption key. (consisting of up to 20 characters)
Procedure
NOTE
• Double-byte and identical characters are not acceptable.
2. Press the Menu/Select key. (Go to step 7 for the initial registration.)
3. If the Encryption Key is changed, enter a new encryption word (consisting of up to
20 characters).
4. Press the Menu/Select key.
5. If the Encryption Key is changed, enter the new encryption word (consisting of up to
20 characters) a second time.
6. Press the Menu/Select key.
7. Turn off the Main Power Switch and turn it on again more than 10 seconds after.
8. Select [Admin. Setting] → [Security Setting] and perform HDD Format.
9. Turn off the Main Power Switch and turn it on again more than 10 seconds after.
14.3.11

OpenAPI

A. Access Setting
Functions • To allow or restrict the access from other systems with OpenAPI when using Page
Scope Data Administrator.
Use • To restrict access from other systems with OpenAPI.
Setting/ • The default setting is Permit.
Procedure
B. Port No.
Functions • To set the access port for other systems with OpenAPI when using Page Scope Data
Administrator.
Use • To change the access port number for other systems with OpenAPI.
Setting/ • Enter the port number between 1 and 65535.
Procedure
176
Account Track setting
: Box and text in the box, Setting information of each
box, Box for Fax
"Permit"
Field Service Ver. 2.0 Mar. 2006
Prohibit