Maintenance Procedure (Periodic Parts Check); Feed Roller (Tray 1) - Konica Minolta magicolor 5430 DL Service Manual

Periodic Check
1.5

Maintenance Procedure (Periodic Parts Check)

NOTE
• The alcohol referred to in the following procedures is isopropyl alcohol.
• Be sure to note that the feed trays are named differently depending upon the
printer model.
• The following procedures use the magicolor 5430 DL/5440 DL tray names.
1.5.1

Feed Roller (Tray 1)

[2]
[1]
[5]
magicolor 5430 DL / 5440 DL
MANUAL FEED TRAY
TRAY 1
[1]
4138fs2520c0
[3]
[2]
4138fs2001c1
[4]
4138fs2002c1
2-6
Main Unit Field Service
magicolor 5450
TRAY 1
TRAY 2
A. Cleaning Procedure
1. Slide out Tray 1.
2. Using a soft cloth dampened with
alcohol, wipe the Feed Roller [1]
clean of dirt.
B. Replacement Procedure
1. Slide out Tray 1.
2. Lock the Paper Lift Plate [1].
3. Snap off two C-clips [2] and remove
the bearing [3] at the front.
4. Snap off the C-clip [4] and remove
the Feed Roller [5].