Tech. Rep. Mode; Calling The Tech. Rep. Mode To Screen; Procedure; Exiting - Konica Minolta bizhub C250P Service Manual

16. TECH. REP. MODE

16. TECH. REP. MODE

16.1 Calling the Tech. Rep. Mode to Screen

NOTE
• Ensure appropriate security for Tech. Rep. mode function setting procedures.
16.1.1

Procedure

Message window
1. Make sure that the default screen (Ready to print) is being displayed, and press the
Menu/Select key on the control panel.
2. Display the Service mode using
3. Press key to open the Password screen.
4. Enter the Password using
5. Press the Menu/Select key to set the Password.
NOTE
• When selecting "CE Authentication" under "Enhanced Security" available from
Service Mode, authentication by CE password is necessary.
Enter the 8 digits CE password, and press the Menu/Select key.
(The initial setting for CE password is "92729272.")
• If a wrong CE password is entered, re-enter the right password. The machine will
not enter Service Mode unless the CE password is entered correctly. To return to
the Basic screen, turn Main Power Switch OFF, and ON again.
• The service code entered is displayed as "
6. Display the Service mode item to be changed using
7. Press the Menu/Select key to set the item to be changed.
16.1.2

Exiting

• Press the "Cancel" key.
16.1.3

Changing the Setting Value in Service Mode Functions

1. Enter the target value using
2. Press key to shift to the next digit.
3. Enter the target value using
4. Repeat the steps 2 and 3 to enter all the necessary items.
5. Press the Menu/Select key to enter the setting.
180
Key
Menu/Select Key
, keys.
, , , and keys.
✽
."
, keys.
, keys.
Field Service Ver. 2.0 Mar. 2006
Key
Key
Cancel key
4038F3E188DA
Key
, , , and keys.