Field Service Ver. 2.0 Mar. 2006
17.14.7
8 Color Solid Pattern
Functions
• To produce an 8-color solid pattern.
Use
• Used for checking color reproducibility and uneven density of each color.
Pattern
Setting/
• # of Print ("1" to 999)
Procedure
• Select "SINGLE" (single print) or MULTI (multi print).
• Select FEET or "HYPER."
• Select "Gradation" or Resolution if HYPER has been selected.
• Type the density level (0 to "255").
17.14.8
Running Mode
Functions
• To test the printing operation in Running Mode.
Use
• Use to check the printing operation in Running Mode from each paper source.
Setting/
1. Call the Service Mode to the screen.
2. Click these keys in this order: [Test Mode] → [Running Mode].
Procedure
3. Select the paper size (Tray 1, Bypass only).
4. Select the paper type.
5. Press the Start key to start the Running Mode.
6. Pressing the Stop key will stop operation.
17.15 Finisher
For details on adjustment, see the Service Manual for Option FS-603.
Functions
• To adjust the positions of center staple and folding for the Finisher.
Use
• Use when the center staple and folding positions deviate from the correct ones in the
prints made using the Fold & Staple function.
• Upon setup of the Finisher (FS-603).
Adjustment
• Center staple position:
Specification
The adjustment range is -7.0 mm to +7.0 mm (in 1-mm increments).
• Fold position:
The adjustment range is -7.0 mm to +7.0 mm (in 1-mm increments).
SINGLE
HYPER
Gradation
Density: 255
4036fs3047c0
17. Jig Soft
273