Settings In The Billing Setting; Counter Setting - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006

19.3 Settings in the Billing Setting

19.3.1

Counter Setting

Functions • To set the counting method for the Total Counter and Size Counter.
Use • Use to change the counting method for the counters.
Setting/ Total Counter Mode
Procedure Mode 1: 1 Count per 1 copy cycle (Default: Others 4, Japan)
Mode 2: Large Size is double counts
1
Large Size Counter Mode
• A3/11 x 17
1
• A3/B4/11 x 17/8 1/2 x 14
• A3/11 x 17/B4/8 1/2 x 14/Foolscap
• Not counted (Default: Others 4, Japan)
• A3 and 11 x 17 (Default: US)
• A3, B4, 11 x 17, and 8 1/2 x 14 (Default: Europe, Others 1, Others 2, Others 3)
• A3, B4, Foolscap, 11 x 17, 11 x 14, and 8 1/2 x 14
✽ Count-up Table
Type
2-sided Total
0: No count; 1: 1 count; 2: 2 counts; 3: 3 counts; 4: 4 counts
Long Length Paper Counter Mode
1
• When printing on the long paper (457.3 mm or over), the counting value will be the
total of the value set by the large size counter mode and the value by this setting.
• The default setting is Mode 4.
Mode 1 : + 0 count
Mode 2 : + 1 count
Mode 3 : + 2 counts
Mode 4 : + 3 counts
(Default: US, Europe, Others 1, Others 2, Others 3)
Printing
Sizes other than
Size
Large Sizes
Mode Mode
1
Total 1
Size 0
0
: When it exceeds 279 mm in the main scan
direction and 420 mm in the sub scan direc-
tion (exceeds 399 mm at FAX scan), it is
regarded as the Large Size.
: When it exceeds 215 mm in the main scan
direction and 355 mm in the sub scan direc-
tion (exceeds 337 mm at FAX scan), it is
regarded as the Large Size.
: When it exceeds 203 mm in the main scan
direction and 330 mm in the sub scan direc-
tion (exceeds 313 mm at FAX scan), it is
regarded as the Large Size (However the size
in the main scan direction changes according
to the Foolscap Size Setting.)
1-Sided
Sizes other than
Large Sizes
Large Sizes
Mode
2 1 2 1
1 1 2 2
0 1 1 0
0 0 0 1
19. Billing Setting
2-Sided
Large Sizes
Mode Mode
2 1 2
2 2 4
0 2 2
1 1 1
281