Settings In The Billing Setting - Konica Minolta bizhub C200 Service Manual

12. Billing Setting

12.3 Settings in the Billing Setting

12.3.1 Counter Setting
Functions • To set the counting method for the total counter and size counter.
• To set the size regarded as the large size (2 counts.)
Use • Use to change the counting method for the counters.
Setting/ Total Counter
Procedure Mode 1: 1 count per 1 copy cycle (Default: Japan)
Mode 2: Large size is double counts
NOTE
• The content of this setting is reflected in the count method with the key
counter.
Size Counter
• A3/11 x 17
• A3/B4/11 x 17/8
• A3/11 x 17/B4/8
• Not counted (Default: Japan)
• A3 and 11 x 17 (Default: US)
• A3, B4, 11 x 17, and 8
(Default: Europe, Others 1, Others 2, Others 3, Others 4)
• A3, B4, Foolscap, 11 x 17, 11 x 14, and 8
✽ Count-up table
2-sided Total
0: No count; 1: 1 count; 2: 2 counts; 3: 3 counts; 4: 4 counts
270
(Default: US, Europe, Others1, Others2, Others3, Others4)
/ x 14
1
2
1 / x 14/Foolscap: When it exceeds 203 mm in the main scan direction
2
1 / x 14
2
Copying
Sizes other than
Size
those specified
Mode Mode
1
Total 1
Size 0
0
Field Service Ver. 1.0 Jun. 2008
: When it exceeds 279 mm in the main scan direction
and 420 mm in the sub scan direction (exceeds 399
mm at fax scan), it is regarded as the large size.
: When it exceeds 215 mm in the main scan direction
and 355 mm in the sub scan direction (exceeds 337
mm at fax scan), it is regarded as the large size.
and 330 mm in the sub scan direction (exceeds 313
mm at fax scan), it is regarded as the large size
(However the size in the main scan direction
changes according to the foolscap size setting.)
1 / x 14
2
1-Sided
Specified Sizes other than
sizes those specified
Mode
2 1 2 1
1 1 2 2
0 1 1 0
0 0 0 1
2-Sided
Specified
sizes
Mode Mode
2 1 2
2 2 4
0 2 2
1 1 1