Adapt To Electrically Operated Seat Tilt And Backrest Tilt Adjustments - Invacare Rea Bellis Assembly Instructions Manual

Adapt to electrically operated
seat tilt and backrest tilt adjustment
1.
2.
Tools: Ciclip pliers
3.
8
Tools: 2,5 mm Allen Key
screwdriver
A
B
1. Start by loosening both of the tilt adjustment
handles with their attachments on the push bar.
2. Release the backrest with the pin on the back of
the backrest tilt piston. Loosen this piston from
its attachment under the seat by removing the
circlips (A) and the dowel (B).
3. Then remove the protective casing of the seat
tilt piston by loosening the clips on both sides.
REA BELLIS