8.1.2
Opening the centre panel
Requirements:
• 4 mm Allen key
Dismantling the centre panel:
•
Remove the rear cover as described in chapter 8.1.1.
•
If possible, use the lifter to move the seat to the uppermost position.
•
Loosen the two Allen screws (1) using a 4 mm Allen key.
•
Lift the rear part of the cover carefully and remove the two spacers that are underneath the
cover on the Allen screws.
•
Lift off the entire cover. If the mobility aid does not have a lifter, the cover must be bent apart
carefully as shown in the picture on the right.
•
Refitting the centre panel:
•
Refit the parts in reverse order.
•
Now tighten all the screws finger-tight again.
•
32