Invacare Storm Service Manual page 87

•
Loosen the four Allen screws at the front (7) and at the rear (8) that can be found on the side
of the seat mounting plate in order to release tension and facilitate moving the plates. Do not
remove these screws entirely.
•
Pull or push the seat mounting plate (2) to the desired width. A scale (3) is included on the
lower part of the seat support. You can read off the seat width in centimetres on the scale.
•
Repeat these work steps on the other side of the seat.
• Now tighten all the screws again.
•
86