Fitting The Headrest; Fitting The Headrest To The Standard Back - Invacare Storm Service Manual

Hide thumbs Also See for Storm:
Table of Contents

Advertisement

8.13

Fitting the headrest

8.13.1 Fitting the headrest to the standard back

Requirements:
• 5 mm Allen key
• 10 mm socket spanner
Gripping it at the base, hold the lower section of the headrest mounting (4) with the clamp
block against the handlebar (3).
Attach the clamp cover (2.
Insert the four Allen screws (1) from above through the boreholes.
Fit the four cap nuts (5) to the screws from underneath.
Use a 5 mm Allen key and a 10 mm socket spanner to tighten the screws and the cap nuts.
Fit the headrest in the guide bar.
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents