Updating The Drive Program - Invacare Storm Service Manual

8.4.7

Updating the drive program

The drive programs for electric mobility aids are continually being further developed and improved
by Invacare®. For this reason, you should always check whether the drive program version
number is up-to-date when carrying out any repairs or regular maintenance.
If a newer version is available, the drive program should be updated. The procedure for updating
the drive program is described in the wizard software operating manual.
Note
If you have carried out customer-specific modifications to the drive program, you will have to
make these changes again after installing the new drive program.
CAUTION: any changes to the drive program can affect the driving characteristics and the
tipping stability of the mobility aid!
• Changes to the drive program may only be carried out by trained Invacare® specialist
dealers!
• Invacare® can only give a warranty for safe mobility aid driving behaviour - especially tipping
stability - for unaltered standard drive programs!
Requirements:
• Dynamic® Wizard software
• Further requirements, such as a minimum system configuration for the PC used for
programming, required programming cables etc. can be taken from the Wizard software
installation manual.
71