8.9
Seat support
8.9.1
Adjusting the seat width
Note
The seat width can be adjusted in stages between 38 and 53 cm.
Please also observe the following chapter 8.9.2 on "adjusting the seat depth".
Note
Depending on the width and depth of the seat, the splash guards must also be replaced. Please
also observe chapter 8.1.5 on "replacing the splash guard".
Requirements:
• 4 mm Allen key
•
•
Remove the seat cushion.
•
Remove the cover plates (1).
•
Release the two Allen screws (6) on the crossbar at the rear and remove them.
•
Release the two upper front Allen screws (9) on the seat mounting plate and remove them.
85