Back Unit; Replacing The Standard Back - Invacare Storm Service Manual

8.10

Back unit

8.10.1 Replacing the standard back

Requirements:
• 5 mm Allen key
•
Dismantling the back unit:
•
Remove the back cushion.
•
Loosen and remove the Allen screws (3) incl. the washers on the left and right side of the
mobility aid.
•
Carefully remove the back section (1) from the seat support (2).
Refitting the back unit:
•
Refit the parts in reverse order.
•
To conclude, check all the mobility aid functions.
91