Setting You Can Change With The User Tools (System Settings) - Ricoh Aficio Color 4006 Operating Instructions Manual

Setting You can Change with the User Tools (System Settings)

Reference
For how to access the user tools,
System setting
Menu
Panel Tone
Ready/Tone
Copy Count Display
Auto Timer
Control Panel Off Timer
System Reset Timer
(Printer Option Required)
Function Reset Timer
(Printer Option Required)
see page 151.
The key tone sounds when a key is pressed. This beeper can be turned on or off.
Note
Default: On
Choose whether the machine beeps when it becomes ready for a copy run after
power up.
Note
Default: On
When the "Panel Tone" is set to Off, the beeper does not sound even if the "Ready/
Tone" is set to On.
The copy counter can be set to show the number of copies made (Count Up), or the
number of copies remaining to be made (Count Down).
Note
Default: Up
The machine turns itself off automatically to conserve energy after your job is finished,
after the selected time. This function called "Auto Off". The time can be set from 1 to
120 minutes.
Note
Default: 60 minutes
The machine enters Energy Saver mode automatically after your job is finished, after
the selected time. The time can be set from 10 to 990 seconds (in 10 seconds steps),
or off. In Energy Saver mode, the panel display turns off.
Note
Default: On (60 seconds)
The machine returns to its prioritized mode automatically a certain time after your job
is finished, after the selected time. The time can be set from 10 to 990 seconds (in 10
seconds steps), or off.
Note
Default: On (60 seconds)
When Interleave Print is turned on and a print job comes along while the machine is
busy printing another job, this delay specifies how long the machine will wait before
switching to the priority print job. The time can be set from 10 to 990 seconds.
Note
Default: On (60 seconds)
The Optional Printer is required to use this function.
Description
User Tools
155