Shipping And Packing List; General - Lennox iComfort S30 Installation And Setup Manual

WARNING
Improper installation, adjustment, alteration, service or maintenance can
cause property damage, personal injury or loss of life. Installation and service
must be performed by a qualified installer, service agency or the gas supplier

Shipping and Packing List

®
1 - iComfort S30 includes a Smart Hub, HD Display, Mag-Mount and optional
use wall plate.
4 - Mounting screws
4 - Wall anchors
1 - Installation and setup guide
1 - User guide
1 - Warranty certificate

General

®
This iComfort S30 is an electronic communicating, color display touchscreen
and 7-day programmable interface which communicates directly with a Smart
Hub. The Smart Hub stores system parameters and settings in non-volatile
memory (i.e., retains data when electrical power fails or is turned off). After
online registration is completed, the system may then be accessed by the
homeowner from anywhere using a remote Internet connection via computer or
personal communicating device. The iComfort
equipment and features:
S
Wireless bands 802.11b, 802.11g and 802.11n,
®
S30 supports the following
S
Three languages are supported (English, Français and Español),
S
Air conditioning or heat pump units with up to four stages of heat / two
stages of compressor operation (two stages of heat pump heating,
auxiliary back-up heating and emergency heating),
S
Variable - capacity / multiple - stage heating and colling, universal
compatibility (gas/electric/heat pump/air conditioner)
S
Dual-fuel capable (iComfort
points.
S
iComfort Mobile Setup application are available for IOS 6.0 and higher
(App Store) and Android 4.1 and higher (Google Play)
S
®
iHarmony zoning system (2 - 4 zones),
S
®
Lennox iComfort Equipment Interface Module (catalog number 10T50)
®
(connects the iComfort S30 to non-communicating indoor and outdoor
units.
S
Smart Away™ - Uses the iComfort
home temperature while unoccupied (geo-fencing).
S
Feels Like™ - Control the system using outdoor / indoor temperatures and
indoor humidity to create the optimal comfortable conditions in the home.
S
Climate IQ™ - Monitors current climate conditions and automatically
removes excess humidity when necessary (requires iComfort
unit),
S
Perfect Temperature (Single Set Point) - In non-zoning applications this
allows a single temperature setting to be used to cool or heat the home.
S
®
Humiditrol Enhanced Dehumidification Accessory (EDA),
S
Enhance defrost control options for Lennox communicating heat pumps
using Intellifrost™ Adaptive Defrost Control, part number 103369-04 or
later.
3
®
heat pump only) with high and low balance
®
Thermostat application to control the
®
outdoor